About BluRay 150 & 100 Auto Continuous Kitchen, Bathroom and Utility Fan
The Sub Surface BLURAY fan is a multifunctional app controlled high performance, dehumidifying fan designed for the particularly demanding condensation control requirements of kitchen, utility or similar environments. As well as being a multifunctional fan controlled by an app, includes speed control (reversable for BLURAY 150). They are recommended for use as part of a cross-flow ventilation system with other Vapourflow units.
These units are particularly effective for damp conditions. The fan is a very neat below surface fan where nothing can be seen except for the front grille. Basic operational setting as a BLURAY unit is to to run continually, extracting at low speed to remove moisture laden air at source before it can condense. This condensation control is achieved through the inclusion of an internal Autostat unit. When the built-in Autostat detects the humidity level rising above acceptable levels the fan triggers into high speed delivering powerful performance when it is needed most. Control the Autostat unit by a remote switch or by app bluetooth control.
Features and Benefits
Recommended to be used as part of a cross-flow ventilation system with other Vapourflow units
Incorporates the Autostat humidity controller which continually monitors ambient humidity and automatically adjusts the control level accordingly
Speed control via smart phone app, reversible fan for BLURAY 150
Low energy, low cost continuous running at 50m³/h (Low speed)
Incorporates a data-logger that captures humidity, temperature and fan operation providing details on the dwelling air quality for improved condensation control management, all available with bluetooth download
Automatic switch to high speed when required
Incorporates reversible DC fan motors – designed to operate for 50,000+ hours fault free
Which means:
◊ Almost silent operation on trickle
◊ Cost effective as it is inexpensive to run, low maintenance and has a long life.
◊ Can be fixed in any orientation without affecting performance (wall, ceiling)
Air flow continuous, thereby conforming to building regulations part F
5 year motor guarantee, and 2 year product guarantee
The BLURAY fans are programmed for proportional overun timer control, minimal operation at high speed
Manual override option via bluetooth app control or for BLURAY 150 via wired in switch & BLURAY 100 by switched live.
General Notes on Fan Installations
The fan position should be as far as practical from the main source of air replacement. This is to avoid short-circuiting of the airflow. The fan can be placed on a wall or ceiling. The Warm Air Dehumidifier Kitchen Fan has a 150mm spigot to fit into a circular telescopic wall sleeve. The ducting hole through the wall requires a minimum of a 5 degree downward slope to the outside.
The fan should be located at a high level close to the moisture source. If the room/ dwelling contains a fuel burning device such as a gas boiler with a non-balanced flue, it is essential that there is enough replacement air to prevent fumes being drawn down the flue where the fan is extracting.
For more information, please contact us.
General Maintenance
VapourFlow products are designed with longevity in mind, for this, they need to be cleaned and maintained on a regular basis.
It is advised that every 6-12 months the following should be done:
- Wipe the chassis and grilles with a damp cloth to remove any detritus
- Hoover the grilles to remove any large dust particles that may have been formed